INSTALLING CAR SPEAKERS
When you plan on installing a new set of car speakers, the items required would be: rollers, blow dryer, superglue, electrical tape, screwdrivers, wire strippers, wire crimpers, speakers, and car door poppers. After collecting all these things, the following steps would help you in installing your car speakers successfully:
1. Using the door panel popper, carefully remove the door panel of the car.
2. Remove the previously installed set of car speakers.
3. With the help of a hair dryer or heat glue, heat the accumat or dynamat.
4. Apply some glue over the door surface.
5. Peel the back side of the accumat or dynamant and again with the help of the dryer or heat gun, heat the material as the accumat or dynamat is applied to the surface of the metal.
6. Apply roller so that the material fixes well with the metal.
7. Put the speakers in the cavity and screw well via accumat to the door’s metal.
8. Plug positive wire to the positive opening and negative to the negative at the speaker’s back.
9. Plug in the negative and positive into their respective inputs.
10. Remove the old speakers.
11. Finally, Drop the new car speakers in the rear deck opening.